Co2 Laser Marking Machine For Product Identification

Co2 Laser Marking Machine For Product Identification

The basic parts of CO2 Laser Marking Machine are Marker, Lasers, Laser pointer, Laser gun and Cylinder. These parts are very functional in marking steel products. Marker is a small hand held device that is used to transfer the mark to the metal. There are a variety of different types of Marker available for marking purposes. Marker types are discussed below:

Carbon dioxide laser tracing machine (CO2 laser marking) is infrared co2 laser marking machine (CO2 is hydrogen fluoride). It utilizes carbon monoxide gas as the working medium for the laser marker. CO2 laser source insert carbon monoxide into the electrodes, inflate carbon and other auxiliary fuel into the electrode tubes and insert high voltage into the tip of the fiber optic project. Then the light energy passing through the tip of the fiber optic project comes in contact with the carbon and produces the high-frequency vibration which makes the light emitting diode (LED) produce the light. After creating this vibration the light gets transmitted through fiber optics to an output transistor which converts the signal into an electrical signal and this process produces the indication of the name or address on the target material.

Fiberoptic interconnects and modems are the application components of CO2 laser marking machines. Fiberoptic interconnect consists of many fibers which are connected with some power source. This is controlled by software to adjust the rate of light transmission to give the best accuracy results in a short time. Modem uses different methods such as binary codes, non-metallic probes, and electrical tests to find the flaws in the circuits.

CO2 laser marking machines use certain marking software to give accurate results. Marking software is used to create the target image and to set parameters for the co2 laser marking machine. The software can control the machine operation and speed up the process of marking in quick time. The software also controls the co2 laser marking machine and its operations. The parameters of this machine are adjusted so that it gives high precision results and identifies faults easily in less time.

The main components of the co2 laser marking machine include the laser source, the target material, fiberoptic interfaces, reference material and reference pattern. The laser source is a concentrated source of light which passes through fiberoptic interfaces to the target material. This passes through a small hole which is sealed from the outside world. The laser source produces photons after getting absorbed by the target material which is in the form of color glow.

The fiberoptic interfaces are used to link the output fiber to the input fiber of laser printer. They act as an interface between the laser diodes and the organic glass. The output fiber is connected to the target product in the form of a thin film. The laser tracing software helps to identify the defects on the thin film by enabling high precision marking of the product.

Tags:sfx co2 laser engraver | sfx fiber laser marking machine