How to Set Up Laser Marking System For High Performance

How to Set Up Laser Marking System For High Performance

A Co2 Laser Marking Machine is a laser printer for marking different items like logos, text, dates, etc with high-precision and speed. This machine produces a black result after printing the mark in an aluminum plate. This process is not only limited to marking but can also be used to engrave. The CO2 Laser Marking Machines is available in different types and sizes for different requirements. The Marking guns are made up of CO2 gas for the triggering of the gun, a diamond shaped abrasive material for cutting and grinding and an electrical outlet for controlling the running of the laser. All these equipments are housed in a high tech and safe environment to ensure that they do not face any hazard during usage.

CO2 Laser Marking Machines is gas-based, compact, luminous, non-leaking, solid-tipped, photo-luminous and photo-transcopic marking equipments that are powered by one or two 12 V batteries. They are the best alternative to old-fashioned ink-jet and laser marking systems and are highly versatile. Co2 laser marking machine works on the principle of absorbing energy in the form of photons emitted from the laser tube, converting it into a voltage. The converted voltage is then used to power the laser tube and generate the required illumination.

Old marking equipments required mercury, lead or cadmium to emit photons. With the introduction of newer generation co2 laser marking machine that uses gases, this process becomes feasible for use in marking plastic materials like polymers, plastics, thermoset resins, acrylics etc. Some of the popular items that can be marked using this laser tube include; plastics, wood, metal, acrylics, textiles, leather, paper, fiberglass etc. These all materials can easily be marked using co2 laser marking machine. This is a cost-effective method that allows manufacturers and suppliers to produce bar codes easily and economically.

In order to utilize the high output power of co2 laser marking machine, the material should be prepared properly. Prior, to marking, an acrylic material should be laid out with even sides. This prevents the hot laser tube from hitting either of the even sides of the acrylic material. In addition to that, the sides should also not be bent or twisted at all. This prevents from heating up of the other side of the material which may affect the marking process.

Marking speeds can be set according to various parameters such as line speed, coating thickness, marking pattern and density. Marking patterns can be based on both analog and digital scan formats. In order to improve the performance of the machine, various methods are available to optimize the set-up. However, when you use co2 laser marking machine in high performance field, it is better to use some special tools. These tools can help to remove minute air bubbles and other unwanted materials during the process.

The two basic types of material which can be marked through co2 laser marking systems are plastics and thermoplastics. While plastics can be marked easily, they are usually used for low-volume, short-run projects. Thermoplastic materials like thermoplastics can be used for long run projects and heavy printing requirements. When you are marking thermoplastics, you should use high precision equipment. This ensures that the material reaches the intended mark thickness and it also remains hard enough after being marked with co2 laser marking system.

Tags:sfx laser engraving machine