The CL-100 Pulsed Fiber Laser Cleaning Machine

The CL-100 Pulsed Fiber Laser Cleaning Machine

The CL-100 pulsed fiber laser cleaning machine is a versatile and compact machine that is highly portable. This equipment features a fiber laser source that delivers high peak high frequency pulses to clean hard materials and metal surfaces. The high peak high frequency pulses remove contaminants, surface layers, and coatings without damaging the base material. This machine is air-cooled and can operate on a 100-240V AC power supply.

The CL-100 is equipped with dual modes of operation. The first mode is CW-based, while the second is MOPA-based. CW-based cleaning results in darker materials while the latter produces lighter surfaces. The CW-based cleaning method can cause a high degree of heating to the substrate, which is not acceptable in the module cleaning industry. With MOPA-based cleaning, the damage to the substrate is minimal, and the surface is smooth.

Moreover, the CL-100 uses MOPA-based laser, which causes minimal damage to the substrate. It produces a roughness value close to the original surface. On the other hand, CW-based cleaning produces a roughness value 1.5X higher than the original surface. This is why you should select the right cleaning method for your application. If you are using a CW-based laser, make sure to choose a speed that suits the cleaning task.

The CL-100 has a non-contact and high-precision mode to clean and disinfect surfaces. The high-power density of laser beams allows for a precise cleaning process without damaging the substrate. This high-tech machine is easy to install and use, and uses no chemical agents. With this powerful beam, it can remove paint, oil, stains, rust, and other contaminants on a wide variety of surfaces, including metal and plastic.

Tags:ezcad3.0+2.5d+motorized z axis fiber laser machine | co2 laser cutting machine | co2 laser marking machine | fiber laser engraver